VeterinaryAntiseptics & Disinfectants

GLUTEX™ GQ1

Liquid
2.5% + 14.0%
GENERIC NAMEAlkyl Methyl Benzyl Ammonium Chloride + Glutaraldehyde
MANUFACTURED BYSquare Pharmaceuticals PLC
Compare Brands
Available Pack Sizes:1 Size
Maximum Retail Price (MRP):
Quantity
৳ 135.00/ 500 ml
1
16263

Composition

Glutaraldehyde 140%, Alkyl (C₁₄ 50%, C₁₂ 40%, C₁₆ 10%) dimethyl benzyl ammonium chloride 25%, Inert Ingredients 835%.

Description

GLUTEX GQ1 is an industrial sanitizer designed to control microbial contamination in animal production facilities and farm equipment, including poultry and turkey houses, swine housing and farrowing areas, barns, large animal buildings, hatcheries, setters, chick processing facilities, cages, transport vehicles, and hatching eggs. It is also used to sanitize industrial and non-food contact surfaces such as mixing, packing, and packaging equipment, product transfer lines, storage tanks, floors, and walls. Additionally, it is intended for use by manufacturers and formulators in formulating products for animal housing and industrial sanitizing applications. Formulators using this product are responsible for the EPA registration of their formulated products.

Indications

General:

GLUTEX GQ1 is indicated for use as an effective, fast-acting, broad-spectrum microbiocide against pathogens that cause deadly animal diseases.
The formulation combines 14% glutaraldehyde with 25% quaternary ammonium salt to effectively disinfect and sanitize against a broad range of viruses, bacteria, spores, and fungi in animal production.
The combination of glutaraldehyde and quat is synergistic, as quat works to increase the penetration of glutaraldehyde into the cell.
The formulation additionally provides a quick rate of kill with improved performance in the presence of organic matter.
The product is readily biodegradable according to the OECD 301A test method, making it environmentally friendly.
The formulation contains the highest percentage of glutaraldehyde of the glut/quat combination products, offering improved broad-range performance.
The corrosivity of the product is similar to water when diluted to end-use levels, making it preferred over oxidizing agents or straight quat formulations which can be highly corrosive.
The inclusion of two active ingredients provides enhanced fungal efficacy.
The formulation leaves no tacky buildup on treated surfaces, eliminating the need for time-consuming and costly removal and cleanup.
The product contains no formaldehyde or formaldehyde release, and glutaraldehyde is not classified as a carcinogen.
The formulation reduces contamination on a wide variety of surfaces such as stainless steel, aluminum, painted concrete, plastic, and glazed tile.
The product can be diluted with a wide range of water hardness, with testing showing ease of dilution up to 1200 ppm hardness.
Internal laboratory testing resulted in lower corrosion to metals than the control of water applied in testing on metals such as low carbon steel, galvanized steel, and Galvaneel steel.

Poultry:

GLUTEX GQ1 is proven to effectively sanitize hatcheries with efficacy against key pathogens such as Salmonella cholerasuis, Pseudomonas aeruginosa, Aspergillus fumigatus, and many more pathogens.

Dosage & Administration

Do not use this product on food or feed.

Sanitizing Non-Food Contact Surfaces, Farm Housing Facilities & Equipment:

Pre-clean surfaces with detergent and water.
Saturate surfaces by mop or spray with 0.45 to 1.8 fl oz per gallon of water (35 to 141 ml/L) for 0.06% to 0.24% active ingredient (against Porcine circovirus: 0.9 to 2.2 fl oz/gal or 69 to 173 ml/L for 0.1% to 0.25%).
Allow to stand for at least 5 minutes or until thoroughly dried; ventilate before reuse.

Sanitizing Non-Food Contact Surfaces, Industrial Equipment & Buildings:

Dilute 0.45 to 1.8 fl oz per gallon of water (35 to 141 ml/L).
Saturate surfaces and allow to stand for at least 5 minutes; ventilate enclosed spaces.

Precautions & Warnings

Danger: Keep out of reach of children. Causes irreversible eye damage. Causes skin irritation. Harmful if inhaled. Harmful if swallowed. Harmful if absorbed through skin. Prolonged or frequently repeated skin contact may cause allergic reactions in some individuals. Causes asthmatic signs and symptoms in hyperreactive individuals. Do not get in eyes, on skin, or on clothing. Avoid breathing vapor. Do not swallow. Wear goggles, protective clothing, and butyl or nitrile gloves. Wash thoroughly with soap and water after handling. Remove contaminated clothing and wash before reuse. Environmental Hazards: This pesticide is toxic to fish. Do not discharge effluent containing this product into lakes, streams, ponds, estuaries, oceans or other waters. First Aid: If swallowed: Call a poison control center or a doctor immediately for treatment advice. Do not induce vomiting. Do not give anything to drink. If in eyes: Wash immediately and continuously with flowing water for at least 30 minutes. Remove contact lenses after the first 5 minutes and continue washing. Obtain prompt medical consultation, preferably from an ophthalmologist. Call a poison control center or a doctor immediately for treatment advice. If on skin or clothing: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call a poison control center or a doctor for treatment advice. If inhaled: Move person to fresh air. If the person is not breathing, call an ambulance, and then give artificial respiration, preferably mouth-to-mouth if possible. Call a poison control center or a doctor for further treatment advice. Note to Physician: Aspiration may cause lung damage. Probable mucosal damage may contraindicate the use of gastric lavage. Have the MSDS and, if available, the product container or label with you when calling a poison control center or a doctor, or going for treatment.

Storage Conditions

Glutex™ GQ1 is incompatible with many commonly used materials of construction such as steel, galvanized iron, aluminium, tin, and zinc. Glutex™ GQ1 can be stored and handled in baked phenolic-lined steel, polyethylene, stainless steel, or reinforced epoxy plastic equipment. Exposure to high temperatures should be avoided. For short storage times (up to about 1 month), temperatures of up to 100° F (378° C) can be tolerated, but the preferred maximum storage temperature is about 80° F (267° C).

GLUTEX™ GQ1 • 500 ml
৳ 135.00